Weighing display unit
-
About UsShanghai Yazen specializes in electronic platform scales, hanging scales, truck scales, floor scales, analytical balances, explosion-proof scales, checkweighers, batching and packaging scales, LA cloud-platform smart scales, and IoT-based dynamic weighing systems. The company is among the earliest in the industry to adopt online sales platforms.
-
SolutionShanghai Yazen specializes in electronic platform scales, hanging scales, truck scales, floor scales, analytical balances, explosion-proof scales, checkweighers, batching and packaging scales, LA cloud-platform smart scales, and IoT-based dynamic weighing systems. The company is among the earliest in the industry to adopt online sales platforms.
-
NewsShanghai Yazen specializes in electronic platform scales, hanging scales, truck scales, floor scales, analytical balances, explosion-proof scales, checkweighers, batching and packaging scales, LA cloud-platform smart scales, and IoT-based dynamic weighing systems. The company is among the earliest in the industry to adopt online sales platforms.
-
Technical servicesShanghai Yazen specializes in electronic platform scales, hanging scales, truck scales, floor scales, analytical balances, explosion-proof scales, checkweighers, batching and packaging scales, LA cloud-platform smart scales, and IoT-based dynamic weighing systems. The company is among the earliest in the industry to adopt online sales platforms.
-
Contact UsShanghai Yazen specializes in electronic platform scales, hanging scales, truck scales, floor scales, analytical balances, explosion-proof scales, checkweighers, batching and packaging scales, LA cloud-platform smart scales, and IoT-based dynamic weighing systems. The company is among the earliest in the industry to adopt online sales platforms.
P
Product Center
PRODUCTS
P722 - Hand-Pushed Mobile Weighbridge
The weighing platform features a full-carbon steel body with a textured, non-slip surface, finished with sandblasting and acrylic baking paint. The double-layer weighing platform is designed with a frame, effectively preventing damage to the platform caused by impacts during transportation. It is equipped with four anti-tip carbon steel sensors, combined with a protective frame for automatic limit-stop and automatic reset functions.
Category:
Keywords:
- Product Description
- Product Parameters
- Operation video
-
Product Introduction
A floor-mounted weighing instrument specifically designed for factory workshops, featuring a structure that allows for frequent relocation of the weighing position.
The weighing platform features a full-carbon steel body with a textured, non-slip surface, finished with sandblasting and acrylic baking paint. The double-layer weighing platform is designed with a frame, effectively preventing damage to the platform caused by impacts during transportation. It is equipped with four anti-tipping carbon steel sensors that, combined with a protective frame, provide automatic limit stops and automatic reset functionality.
The base comes with built-in rollers for short-distance movement. The foldable armrests make the entire unit easy to carry and save space. The instrument signal cables are concealed within the armrests, ensuring a sleek and aesthetically pleasing overall design, while the structure remains robust and durable.
By connecting the weighing display unit that is optionally available, the scale body can be used for measurement.
Applicable scenarios for the product
Suitable for high-precision measurement and transportation of small-batch goods in industrial, mining, enterprise, public institution, warehouse, grain and oil, and other similar units.
Suitable for environments where frequent movement and weighing are required.
Product Features
1. The carbon steel weighing platform is rigorously manufactured through five steps: plastic spraying, baking varnish, spray painting, cold galvanizing, and hot galvanizing.
2. Integrated-pattern carbon steel weighing platform with a sandblasted and acrylic baked finish, featuring anti-corrosion and moisture-resistant properties.
3. The double-layer scale body features a framed design that effectively prevents damage to the scale body caused by impacts during transportation.
4. Comes with a built-in mobile roller.
5. The dedicated stroller features a foldable armrest design that doesn’t take up much space when folded away. The armrest is equipped with a weighing display instrument, and the signal cables are concealed within the armrest’s steel tubing.
6. The standard model is equipped with four roly-poly-type sensors featuring a structure designed to resist lateral forces.
Product Highlights
1. The double-layer weighing platform features a framed design that effectively prevents damage to the platform caused by impacts during movement and includes an automatic limit-stop function.
2. Tumbler-type sensor with a lateral-force-resistant structural design and an automatic reset function.
3. The casters are custom-made with high-performance bearings, offering exceptional durability.
Product Specifications and Parameters
Standard ranges: 0.5T / 1T / 2T
Standard sizes: 0.8m × 1.0m, 1.0m × 1.0m, 1.2m × 1.2m, 1.2m × 1.5m, 1.5m × 1.5m
Accuracy: 1/6000; special accuracies can be customized upon request.
Optional accessories
Counting display
Printable display
Smart meter
Product Usage Precautions: Weighbridge/Platform Scale Section
I. Usage and Operation
1. Maintain good weighing habits when using the scale. During the weighing process, try to place the goods in the center of the electronic floor scale so that the four sensors on the scale receive an even distribution of force. Never weigh items frequently from just one corner simply for convenience, as this can cause uneven stress on the sensors and shorten the lifespan of the electronic floor scale.
2. When weighing, avoid overloading to ensure that the platform scale remains undamaged and the measurements remain accurate. Regularly clean away any debris around the sensors to prevent them from being obstructed, which could lead to inaccurate readings or erratic counting.
3. Arc welding on the weighing platform is prohibited. If arc welding must be performed on the weighing platform, please note: Disconnect the signal cable from the weigh display controller. The ground wire for arc welding must be placed near the welding area and securely connected to the weighing platform; under no circumstances should the sensor be used as part of the arc-welding circuit.
4. On the same phase line connected to the electronic weighbridge, inductive loads such as doorbells must not be connected.
5. When weighing, the scale should be placed on a flat surface. Also, avoid contact, collisions, or vibrations with other objects to ensure measurement accuracy.
6. Ensure all wiring connections are secure and regularly check whether the limit clearance is appropriate to guarantee normal operation.
II. Operating Environment
1. Pay attention to the humidity and dust levels in the operating environment. It is not recommended to leave electronic weighbridges exposed outdoors for extended periods—especially avoid exposing them to rain. Keep the operating environment dry, and during use, keep the electronic weighbridge away from heat sources.
2. Since many application environments may be threatened by insects and rodents, the signal cables of electronic platform scales are exposed in some areas; therefore, it is essential to take strict measures to prevent damage caused by insects and rodents.
3. In areas prone to frequent lightning strikes or during the thunderstorm season, it is essential to install reliable lightning arresters or other effective lightning protection measures. Both sensors and instruments are electrostatically sensitive devices, and during use, it is imperative to take thorough anti-static measures.
III. Maintenance and Care
1. When the weighing display controller is not used for an extended period (e.g., more than one month), it should be powered on periodically according to environmental conditions to prevent moisture or other harmful gases from compromising its reliability. 2. Avoid contact with corrosive substances to extend the service life. For non-waterproof platform scales, ensure that sensors, junction boxes, and other components are kept dry to avoid damage or interference with measurements. 3. Regularly clean rust from the sensor screws to keep the sensors free of dirt and interference, thus preventing changes in sensor resistance that could affect weighing accuracy. 4. Periodically check the positions of the corner-sensor screws to ensure they remain within the normal operating range. 5. If the electronic weighbridge display fails, immediately disconnect the power supply. If the cause of the failure cannot be accurately determined, promptly notify our company’s professional engineers for inspection and repair. Users must not disassemble the enclosure at will, nor may they arbitrarily replace internal components. Both operators of electronic weighbridges and instrument maintenance personnel must undergo specialized training before engaging in operation or maintenance activities. Contact: 4000217728
Service Commitment
1. Yajin Company’s mission is: “Dedicated to providing users with the most suitable solutions for their weighing equipment needs.” Shanghai Yajin Electronic Technology Co., Ltd. solemnly promises that, while ensuring the advanced nature, reliability, and stability of our equipment, we will continuously enhance our service quality—from pre-sales to after-sales, covering aspects such as delivery, commissioning and activation, equipment maintenance and management, technical services, and user technical training—so as to guarantee customers receive the best possible service and feel completely satisfied and assured.
2. After-sales service
The company’s maintenance center provides 24-hour telephone service, with dedicated engineers handling user calls to ensure that users receive timely technical support throughout the course of their use.
We guarantee to provide a clear solution within one business day after receiving a user’s fault report and to promptly resolve the issue.
3. Warranty Period
From the date of purchase, during the warranty period (12 months), if the product itself malfunctions and our company verifies the issue as genuine, we will provide free repair services and replacement parts.
Beyond the warranty period, only the cost of parts will be charged; lifetime maintenance is provided. The following situations are excluded—please take note.
3.1 Users shall not modify or repair any internal components of the instrument on their own, nor shall they cause any man-made damage.
3.2 Damage caused by improper installation, improper use, or force majeure.
Contact: 400-021-7728 Company website: www.maihengqi.com
-
Product Model Measurement range Accuracy Dimensions (customizable) SCS-P722-0.5 0.5T 100g 0.8m × 1.0m
1.0 m × 1.0 m
1.2m × 1.2m
1.2 m × 1.5 m
1.5m × 1.5m
1.5 m × 2 mSCS-P722-1 1T 200g SCS-P722-2 2T 500g SCS-P722-3 3T 1kg
Product Inquiry
* Note: Please leave your contact information, and our specialists will get in touch with you as soon as possible!
Related products
undefined
Customer service phone
After-sales phone
Company location
No. 2050, Dingsheng Road, Xiaokunshan Town, Songjiang District, Shanghai City, Building 5, Paimile Sheshan Zhidi
Please leave us your contact information, and we’ll get in touch with you within 24 hours.
OUR PRODUCT LINE
WeChat Official Account
WeChat Work
Mall Mini Program
Product Catalog